transponder override 2006 dodge ram diesel
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130201
Printed Date: May 06, 2025 at 9:58 PM
Topic: transponder override 2006 dodge ram diesel
Posted By: the12voltuser
Subject: transponder override 2006 dodge ram diesel
Date Posted: January 13, 2012 at 10:07 PM
I have a Python 4203 with a PKUMUX installed in a 2006 Dodge Ram 2500 diesel. I can get it to start for 2 seconds and then it shuts off. In programming the bypass unit, I feel like I did it right. Is there a way to reset the PKUMUX or try and get it to re-learn the transponder? Where should I go from here?
Replies:
Posted By: the12voltuser
Date Posted: January 13, 2012 at 10:20 PM
Update, now it will not start at all with either the remote start or either of the keys. With the key on, the security light flashes quickly. It will crank with both, but no start.
Posted By: tedmond
Date Posted: January 13, 2012 at 11:16 PM
Remove the bypass and make sure you can start with the keys at least
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: offroadzj
Date Posted: January 14, 2012 at 9:09 AM
If removing the bypass allows the factory key to work then how do you have the bypass connected? It sounds like the vehicle is sensing both keys at the same time. Make sure you used the r/s ground out when running so that it is only activated during remote start.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
|