idatalink alca hardwire chrysler/dodge

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130236
Printed Date: May 03, 2025 at 12:33 AM

Topic: idatalink alca hardwire chrysler/dodge

Posted By: phil6710
Subject: idatalink alca hardwire chrysler/dodge
Date Posted: January 15, 2012 at 10:36 PM

I there a way to hard wire an alca bypass to remote start a dodge or chrysler/jeep platform with out a remote starter using the factory remote. I know they offer a direct fit plug and play kit for the alca but why pay extra when it could be hardwired. Any ideas and what about the software too.

-------------
Solartech Window Tinting and Electronics,contract installer

Replies:

Posted By: kreg357
Date Posted: January 16, 2012 at 12:07 AM

Something like this?

https://www.flashlogic.com/rsfirmware

-------------
Soldering is fun!

Posted By: tedmond
Date Posted: January 16, 2012 at 12:48 AM

Install the rs firmware and you can start the truck using factory remotes.
Buy the harness as its not even expensive, saves you from cutting into any wires

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window