I am installing remote start and key-less entry on my 1992 Chevy Silverado. I have successfully installed and the remote start is working but I can't get the key-less entry to work. I have located the wires and attempted to hook them up but nothing happens. Any help would be appreciated. (Installing Avatar model 4200)
Did you mean a 2002 silverado or a 1992 Full Size Pickup. I didn't think they made the "Silverado" before 1998?
If it is in fact a 1992 then here is the door lock info:
Power Lock lt. blue either door boot
Notes: 5 wire (type C) on the two door models, and positive trigger (type A) on the four door and keyless entry models.
Power Unlock BLACK/ red either door boot
Notes: 5 wire (type C) on the two door models, and positive trigger (type A) on the four door and keyless entry models.
If you have the 2 door with the 5 wire (type C) locks then you need to pick up a DEI 451m or 2 5pin relays (the 451m makes things much easier) and wire them with the Type C diagram. You should be able to find that diagram on this site. Do a search for Type C doorlocks.
If you have the 4 door with the positive trigger (Type A) locks then you still need the 2 relays or 451m and do a search for the Type A lock diagram.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Here is a link for the locks. Type A is the "3 Wire Positive" and Type C is the "5 Wire"
Door Lock Wiring-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205