viper 5701, 2007 toyota fj cruiser

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130270
Printed Date: May 08, 2025 at 2:39 AM

Topic: viper 5701, 2007 toyota fj cruiser

Posted By: pinayho24
Subject: viper 5701, 2007 toyota fj cruiser
Date Posted: January 17, 2012 at 7:44 PM

i need help guys..im installing a viper 5701 on my 2007 toyota fj cruiser.. there is two starter wires on this truck..this is my only problem..do i need extra relay for this to work..if u guys can give me diagram for this it will be helfull thanks a lot posted_image

-------------
es

Replies:

Posted By: tedmond
Date Posted: January 17, 2012 at 7:57 PM

second start is required, you need a relay to accomplish this

85 - second start from viper (purple or PURPLE / black)
86 - constant 12v
87 - constant 12v
30 - second start wire.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: offroadzj
Date Posted: January 17, 2012 at 8:59 PM

Look in the Install Pictorials section. I just did a full pictorial write up for that vehicle last week.

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205

Posted By: pinayho24
Date Posted: January 18, 2012 at 1:37 AM

thank you very very much tedmond for your help posted_image

-------------
es

Posted By: pinayho24
Date Posted: January 18, 2012 at 1:39 AM

thanks offroadzj i will check it right now thanks again posted_image

-------------
es

Print Page | Close Window