2008 subaru impreza flcan

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130314
Printed Date: May 10, 2025 at 4:13 AM

Topic: 2008 subaru impreza flcan

Posted By: mazda 6t9
Subject: 2008 subaru impreza flcan
Date Posted: January 20, 2012 at 9:52 PM

doing a remote start on a 2008 impreza tomorrow. Just wanting to make sure the FLCAN unit will work with the right firmware, i guess its TB-SUB would be the one i want??

I only need the transponder bypass I can hardwire the rest and hope the factory security system dosent give problems.

Replies:

Posted By: kreg357
Date Posted: January 20, 2012 at 10:30 PM

Yes. It is a multi step process requiring KLON access. Here is a link to the install guide. https://www.idatalink.com/common/file/get-install-guide/id/7971 Follow the Type 2 wiring instructions.

-------------
Soldering is fun!

Posted By: mazda 6t9
Date Posted: January 21, 2012 at 8:54 AM

You know what download number that would be? Can I flash the box without it being hooked to the car. I just got the USB interface.

Posted By: kreg357
Date Posted: January 21, 2012 at 9:57 AM

Here is a link to the Flashlink WEB site : https://www.flashlogic.com/solutions-for-vehicle/5341

Click on KLON in the top center of the screen and LogIn. It is a multi-step process and, yes, the first firmware download can be done before installation.

-------------
Soldering is fun!

Print Page | Close Window