2003 honda civic 4dr, viper 211hv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130399
Printed Date: May 14, 2025 at 11:34 AM

Topic: 2003 honda civic 4dr, viper 211hv

Posted By: the12voltuser
Subject: 2003 honda civic 4dr, viper 211hv
Date Posted: January 27, 2012 at 1:05 AM

Car: 2003 Honda Civic 4dr Sedan
Item: Viper 211hv Keyless Entry

To start, I'm a college student with more time than money (and little of both), and decided to install a Viper keyless entry system myself. The install instructions are probably legible to someone of the trade, but I can't make too much sense of them. Just want to read up on install before actually attempting it. Any help on how to actually wire the system to the car would be great.

I have the wiring guide for the car (found on bulldog security site) and Viper's wiring guide for the system. I also found this wiring guide from someone doing a similar install on a '92 Chev 3/4 ton Ext Cab. https://www.the12volt.com/installbay/uploads/211.bmp

Haven't tested the unlock/lock wires to ensure 12v when activating the unlock/lock switch, will do that tomorrow.

Am I on the right track??

Replies:

Posted By: kreg357
Date Posted: January 27, 2012 at 4:43 AM

Here is the 2003 Civic info fropm DEI :

Power Lock     WHITE/ Blue (-) gray plug above driver kick
Power Unlock             WHITE/ Green (-)         gray plug above driver kick
Parking Lights(+)      RED / Black (+) back of the fusebox
Horn Trigger Orange (-)        steering column
12volts         White (+)          ignition harness
Ignition            BLACK / YELLOW (+)        ignition harness

H1/1       +12V constant White
H1/2       N.U.
H1/3       N.U.
H1/4       N.U
H1/5       WHITE/ Blue
H1/6       N.U
H1/7       Chassis Ground
H1/8       WHITE/ Green
H1/9       Chassis Ground
H1/10      RED / Black   ***Set to (+) - Factory Default
H1/11      Chassis Ground
H1/12      Orange
H1/13      N.U.
H1/14      N.U.
H1/15      BLACK / YELLOW
H1/16      N.U.
H1/17      N.U.
H1/18      N.U.

-------------
Soldering is fun!

Posted By: the12voltuser
Date Posted: January 28, 2012 at 12:34 AM

Wiring went off without a hitch. Getting back behind that fuse box was a huge pain. Didn't want to remove the seat. I left the horn disconnected, its somewhat of a nuisance to me. Thanks for your guidance!