astrostart / astroflex 5200 programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130423
Printed Date: April 26, 2024 at 5:48 PM

Topic: astrostart / astroflex 5200 programming

Posted By: ak_chevy
Subject: astrostart / astroflex 5200 programming
Date Posted: January 28, 2012 at 11:21 PM

I have an astrostart 5200 in my 2003 Silverado. It has the 5 button remote with the multi colored buttons. It lost program and stopped starting the vehicle. I was able to reprogram the tach signal using the dip switches. It works now but only runs for two minutes. The remote has instructions but they dont seem to change it. I need dip switch programming instructions for setting the run to to the longer setting. Also when I would remote start it the parking lights would come on, now the headlights come on when remote starting it. I would like to know how to change this back if to just the parking lights on when remote starting. Really need some help as its very cold outside. Any input is greatly appreciated.

Replies:

Posted By: KarTuneMan
Date Posted: January 30, 2012 at 7:28 AM

https://www.the12volt.com/installbay/file.asp?ID=746

Posted By: KarTuneMan
Date Posted: January 30, 2012 at 7:35 AM

The issue with the parking/headlights.... interesting to say the least, NOT a programmable feature!

Posted By: ak_chevy
Date Posted: January 31, 2012 at 9:06 PM

I figured out the parking light problem. They are wired to one of the programmable outputs and needed to be programmed. Horn would honk when I locked the doors two times with remote, would like to get this back. Also need to figure out the door trigger for killing the radio after shutdown. Thanks for your help.