94 geo metro alarm wiring
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130437
Printed Date: May 01, 2024 at 2:15 AM
Topic: 94 geo metro alarm wiring
Posted By: jmelton86
Subject: 94 geo metro alarm wiring
Date Posted: January 30, 2012 at 10:15 AM
1994 Geo Metro Alarm Information
"Door trigger" -I would use this for the sensor wire to make the alarm go off when the doors are open, correct?
"Parking lights" -I would use this to make the lights flash when the alarm goes off, correct?
"Trunk release" -I would use this to make the alarm go off when the trunk is opened, right?
If I'm right about the above, could I splice into both the "Parking lights" wire and the "Trunk release" wire for the same signal sensing wire on the alarm?
-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
Replies:
Posted By: tedmond
Date Posted: January 30, 2012 at 11:40 AM
Yes, yes and no.
the trunk release to used to "open" the trunk. this is assuming you have electronic trunk on the vehicle. if you dont you will not need this wire
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: jmelton86
Date Posted: January 30, 2012 at 11:44 AM
https://www.the12volt.com/installbay/alarmdetail/962.html
Sorry, that was for a Metro. I'm working on a Prizm.
What about the "Trunk Pin"? Is this what I'm looking for to have the alarm go off if the trunk is opened?
If so, can I splice this in with the "Door Trigger" into the same signal sensing wire?
-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
Posted By: jmelton86
Date Posted: January 30, 2012 at 1:15 PM
Also, for the "Door Trigger", the diagram says to use "Fuse Panel 2 Pin Connector". What exactly does this mean? Neither of the fuse panels (under hood and l/f kick panel) have anything marked as such.
Any help would be GREATLY appreciated. This is my first real alarm install and it needs to be done ASAP. Someone 2 houses down is planning of ripping me off. I've seen him, in his car, in both the road behind my house and out front just sitting there. As soon as I walk outside & stare him down, he pulls off. I know what he's up to. I have already removed the sub from my car and cleaned my gun LoL I might remove my sub amp tonight.
I've been paranoid like a crackhead the past few nights... It's not a cool feeling...
-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
Posted By: tedmond
Date Posted: January 30, 2012 at 2:20 PM
trunk pin is what you need to have the alarm go off when the trunk is opened. yes you can tie into the door trigger if your unit doesnt have a trunk pin input. make sure you diode isolate.
at the fuse panel, look for a connector that is 2 pinned, or contains 2 wires. one of the 2 wires are for doors. use a multimeter to test.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: jmelton86
Date Posted: January 30, 2012 at 2:32 PM
What kind of diode would I need, and how would I wire it?
Could you explain the 2 pin connector again? I don't even know where to start...
Sorry for all the seemingly rhetorical questions, I just want to get this knocked out correctly the first time.
I've got more money into stereo equipment in the car than it's worth LoL
-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
Posted By: tedmond
Date Posted: January 31, 2012 at 10:16 AM
check diode tab above. use 1N4004
https://www.google.ca/search?hl=en&cp=7&gs_id=q&xhr=t&q=2+pin+connector&gs_sm=&gs_upl=&bav=on.2,or.r_gc.r_pw.,cf.osb&biw=1366&bih=667&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&tab=wi&ei=kRMoT93lIMn40gHkhsHfAg
examples of what 2 pin connectors are. straight forward ?
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: jmelton86
Date Posted: January 31, 2012 at 2:32 PM
Cool. Thanks a lot, bro.
-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
Posted By: jmelton86
Date Posted: February 03, 2012 at 3:51 PM
Done.
Wow. That was WAY easier than I thought it would be!
Thanks for the help.
-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
|