clifford arrow 2 remote programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130466
Printed Date: May 14, 2025 at 1:42 PM
Topic: clifford arrow 2 remote programming
Posted By: 8o8supra
Subject: clifford arrow 2 remote programming
Date Posted: February 01, 2012 at 3:19 PM
I have a arrow 2 alarm installed in a car i bought used it didnt come with any remotes when i bought it so i got a remote online but it says in order to program the remote i need to copy the trace cuts on the old remote (which i dont have) or find the control unit coding tag. I am wondering if any one cold help me to find how i can get the remote programmed. Thanks
Replies:
Posted By: pts760
Date Posted: February 01, 2012 at 3:41 PM
Try this: Page 10 & 11 of the owners guide
Erase the old codes then program new remotes.
Clifford Arrow 2 remote programming------------- I drink current, eat ohms, and bleed voltage
Posted By: howie ll
Date Posted: February 01, 2012 at 4:24 PM
Turn on ignition, flick the valet switch 13* times then press button 1. You should hear 2 confirming chirps.
Turn off ign. then on again, flick 14* times then press button 2, etc. etc.
*You should hear chirps after 3 or 4 flicks of that switch.
The other info is completely wrong, it applied to their previous entry model, the Novell.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: 8o8supra
Date Posted: February 02, 2012 at 12:31 AM
Okay I tried doing that with out cutting traces and it still does not want to work i get the conformation chirp after the first button but it doesn't work. Anything else I can try??? Thanks for the help
Posted By: howie ll
Date Posted: February 02, 2012 at 1:02 AM
DEI GENUINE replacement remote part no. = 904010.
Is that the part number. I'm asking because the on-line supplier might have sold you the externally similar Novell remote.
Frankly, this unit could be up to 18 years of age, highly unlikely to be working anyway.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: 8o8supra
Date Posted: February 02, 2012 at 10:49 AM
yup its the DEI GENUINE part no. 904010 remote. It came with the DEI instructions. The alarm sems to be working fine cause it chirps when i try program and the auto arm & lock function works as well. All the fuses are good.
|