2012 camry bypass
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130476
Printed Date: May 21, 2024 at 4:40 AM
Topic: 2012 camry bypass
Posted By: pts760
Subject: 2012 camry bypass
Date Posted: February 02, 2012 at 9:31 AM
Does anyone know where I can get a bypass for a 2012 PTS Toyota Camry. I've tried ADS and Fortin but can't seem to find anything.
-------------
I drink current, eat ohms, and bleed voltage
Replies:
Posted By: offroadzj
Date Posted: February 02, 2012 at 11:08 AM
If its the same as the 2011, then the Evo-All should do it. I would check with Fortin first to be sure (unless someone on here knows)
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: tedmond
Date Posted: February 02, 2012 at 11:17 AM
no bypass solutions yet. only option is key in the box. they have new encryption which could possibly be 120bit.
important notes: pulse child lock with disarm or if the user locks with the factory remote, the aftermarket remote will not unlock doors.
child safety Violet (-) rests at ground when unlocked
Lock - Red (-)
Unlock - Green (-)
pulsing child safety will not unlock doors.
diode isolate disarm to keysense. DO NOT use GWR or status. the security light will stay on in the cluster when key is inserted. Applies to all 2012+ toyota vehicles.
info was gathered from iDataLink dealer bulletins and summed up here.hope it helps.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: Mike M2
Date Posted: February 02, 2012 at 6:44 PM
The guys at Idata say they get at least 20 calls a day on this car. They are working on it....
Tedmond, "PTS"... ------------- Mike M2
Tech Manager
CS Dealer Services
Posted By: tedmond
Date Posted: February 02, 2012 at 10:01 PM
forget the RFID in the box
didnt notice it was PTS.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: pts760
Date Posted: February 02, 2012 at 10:20 PM
Did a regular cut key 2012 Camry the other day. I used the arm and disarm wires in the vehicle to lock/unlock the doors along with disarm the factory alarm. Piece of cake. We do these for the deal all the time.
-------------
I drink current, eat ohms, and bleed voltage
Posted By: Chris Luongo
Date Posted: February 03, 2012 at 6:54 PM
None of the bypass companies have anything for the PTS 2012 Camry yet.
Your options are the following:
1. Wait.
2. Aftermarket remote starter with DEI 1101T, or possibly solder wires onto smart key and use a relay instead of 1101T.
3. Toyota factory remote starter. Installation is easy (the car comes mostly pre-wired) but the part is expensive, range is short, runtime is short, and you NEED the Toyota dealer's scan tool to program the remote starter to the car.
|