2006 ford 6.0 diesel tach signal?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130485
Printed Date: July 15, 2025 at 8:09 AM
Topic: 2006 ford 6.0 diesel tach signal?
Posted By: 01ws6/tamu
Subject: 2006 ford 6.0 diesel tach signal?
Date Posted: February 02, 2012 at 4:12 PM
What is the most reliable method to get a tach signal on these trucks.
I'm going to be putting in a viper 5902. I've just been out of the game for a good while and remeber these trucks being a thorn in my keister for a decent tach signal. Just curious if anyone has a silver bullet now. It looks like I'll just use the DB-all for the immobilizer bypass. Thanks for all help and ideas.
Replies:
Posted By: 01ws6/tamu
Date Posted: February 02, 2012 at 4:21 PM
Doing this for a friend so it's a favor deal.
Posted By: metz35
Date Posted: February 02, 2012 at 4:37 PM
On diesel vehicles the tach wire is lt. GREEN / WHITE in a 5 wire harness held up with white tape behind the parking brake release. The tach wire on these vehicles may generate an unclean signal. Options maybe to set the threshold jumper to “on/low“ when programming tach in some Directed remote systems or use part number 454T tach signal generator.
|