led bezel, reducer, or clip
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130537
Printed Date: June 23, 2025 at 9:32 PM
Topic: led bezel, reducer, or clip
Posted By: scout238
Subject: led bezel, reducer, or clip
Date Posted: February 06, 2012 at 11:45 PM
Hi guys
I replaced my old car alarm with a new one and the LED hole from the first alarm is too big for the new alarm's LED.
I need some kind of clip/bezel/reducer to either reduce the hole down to fit the smaller led or a large bezel to cover the hole but still work with the smaller LED. I think the hole was for a 5mm and new one is a 3mm.
Any ideas?
Thanks!
Replies:
Posted By: howie ll
Date Posted: February 07, 2012 at 6:19 AM
Grommet, or try Radio Shack for LED holders.
Or retain the original LED or buy another 5mm that matches (voltage and current) with your new one.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|