prestige aps-25ch, 93 hyundai excel

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130593
Printed Date: August 15, 2025 at 3:28 AM

Topic: prestige aps-25ch, 93 hyundai excel

Posted By: 04nata
Subject: prestige aps-25ch, 93 hyundai excel
Date Posted: February 13, 2012 at 4:04 PM

I have a Audiovox APS-25C and below is the wiring diagram and also the one for my car from this site.

I just want to make sure I'm clear on this before I attempt it as I do not want to replace the ECM again. (too pricey)

see questions embedded on pic

posted_image

-------------
2004 Hyundai Sonata
Kenwood KDC-X599 HU
2-Sundown X-18D4
2-SQ Q4500.1
2-SQ Q90.4
1-Massive DBX4
8-Niche 5.25 mids
8-Niche Tweeters
4-Skar 8" mid-bass
OhioGen 220a alt
OhioGen 350a alt
156.0

Replies:

Posted By: offroadzj
Date Posted: February 13, 2012 at 4:20 PM

Yes. The starter wire you need to cut is the BLACK / YELLOW. And Pin 85 of the relay goes to the ignition of the vehicle. You can tie it into the main ignition input to the alarm.

Do you plan on connecting the door locks from the unit to the vehicle or will you be manually locking/unlocking the car and only using the aftermarket fob to arm/disarm?

The range on this unit will be very limited due to the lack of an external antenna. It is a "low budget" alarm and may or may not be a reliable system. Make sure to strip, poke, solder, and tape all connections with a high quality 3m electrical tape (Super 33 or better).

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205

Posted By: 04nata
Date Posted: February 13, 2012 at 4:27 PM

The door lock question is a funny one, so far I have only been successfull in getting the drivers side actuator lined up, mounted and working, passenger side just wouldn't work no matter how many time I re-did it,

So to answer the question, yes I will be hooking up the door lock function, and my plan was to connect one of the alarm outpu wires red or green to one of 2 wires on the door lock switch to achieve the ground that is needed for each way

and yes it is low budget, but it is also an upgrade from what I have now, which works perfectly, but has no door lock output and only 1 remote that works 1/2 of the time.

posted_image

Posted By: offroadzj
Date Posted: February 13, 2012 at 7:16 PM

Does the vehicle not have power door locks or are they just not working? And are you adding aftermarket actuators or trying to fix the factory? If you are adding aftermarket, you will need 2 relays for each actuator (or a DEI 451m)

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205

Posted By: 04nata
Date Posted: February 14, 2012 at 4:23 AM

yes, I have all the stuff just cant seem to get the passanger door acyuator lined up correctly, but everything else is done and workin, thanx for your help

-------------
2004 Hyundai Sonata
Kenwood KDC-X599 HU
2-Sundown X-18D4
2-SQ Q4500.1
2-SQ Q90.4
1-Massive DBX4
8-Niche 5.25 mids
8-Niche Tweeters
4-Skar 8" mid-bass
OhioGen 220a alt
OhioGen 350a alt
156.0