2011 tacoma, viper 4301
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130598
Printed Date: May 02, 2024 at 2:29 AM
Topic: 2011 tacoma, viper 4301
Posted By: cu52
Subject: 2011 tacoma, viper 4301
Date Posted: February 13, 2012 at 9:18 PM
Hello,
Having a viper 4301 Remote start installed in my 2011 Tacoma. I don't want to enable the horn honk, but I do want to keep the factory beep enabled. Does anyone know where that wire is to tie into? I have all the other wires including the (-) horn, but I would prefer to keep the subtle beep over the horn.
I know where the factory peizo is, but I don't know where the wires are located in the truck.
Thanks for the help.
Replies:
Posted By: tedmond
Date Posted: February 13, 2012 at 9:30 PM
there is a post about this famous beep. the toyata uses a speaker to generate the beep. It is not like a horn/pieze buzzer.
------------- Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: cu52
Date Posted: February 13, 2012 at 10:00 PM
I have been searching but cant seam to find anything on it (not a fan of searching on this site/forum). So does that mean there is no way to do that with the Viper 4301 (-) horn output?
|