08 grand caravan and evo chr

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130633
Printed Date: May 25, 2024 at 6:48 AM

Topic: 08 grand caravan and evo chr

Posted By: ziggyb222
Subject: 08 grand caravan and evo chr
Date Posted: February 16, 2012 at 6:47 AM

Going to do my first T-Harness install on a 08 Chrysle Grand Caravan. I have the harness THAR-CHAR2 non tip start and the EVO-CHR. I usually install DEI units but was wondering what brands are compatable with the EVO-CHR data set up. I see there are different types...one way two way and different protocols on the data, Can someone give me a little more information based on thier experience with installing this set up??? Thanks so much!!!!!!

Replies:

Posted By: kreg357
Date Posted: February 16, 2012 at 7:07 AM

Not sure which brand of R/S you are using. However here is a link to Fortin that lists all the
remote start brands and models that directly support the Fortin DataLink Protocol :
https://ifar.ca/en/datalink/

Additionally, if you have the Fortin FlashLink USB cable I believe you can flash the EVO-CHR with
the DEI DBI D2D protocol and with the correct harness connect the bypass to a R/S unit that supports
that protocol. Just check the "D2D" box when you use the FlashLink Updater program .

I believe Tedmond' is very familiar with Fortin and that bypass. He can provide more info.

-------------
Soldering is fun!

Posted By: ropuma
Date Posted: February 17, 2012 at 11:18 AM

use page #5 and #10 . from installation manual (fortin elec.)It will be fine.