stellar rs1050 wire info on 03 silverado

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130705
Printed Date: May 14, 2024 at 12:57 PM

Topic: stellar rs1050 wire info on 03 silverado

Posted By: jen1110bill
Subject: stellar rs1050 wire info on 03 silverado
Date Posted: February 22, 2012 at 3:36 PM

this isnt my first rs install but it is with this brand, the guy wants to keep his factory key fob so he already got me this unit, there are 2 wires 1) activation input 2) bypass output, now where in the vehicle would these be wired to? its a 2003 chevy silverado 1500 4.8l auto, also i cant see where any of the wiring from unit hooks to factory disarm, is one of those two wire go to that?

thanks bill

Replies:

Posted By: metz35
Date Posted: February 22, 2012 at 4:22 PM

Activation input goes to lock or unlock motor. However he wants it to start by hitting lock x amount of time or hitting unlock x amount of times.
The bypass wire is for the bypass.which ever bypass you choose to use to circumvent the passlock 2 system.

Posted By: jen1110bill
Date Posted: February 22, 2012 at 4:54 PM

Ok thanks, i should also diode isolate that acktivation wire too correct?

-------------
BILL

Posted By: metz35
Date Posted: February 23, 2012 at 5:09 AM

You can if you want the worst thing that will happen if you don't is he will be able to start it with the switch on the door panel

Print Page | Close Window