does cm6000 have non volatile memory?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130744
Printed Date: May 13, 2024 at 1:09 PM

Topic: does cm6000 have non volatile memory?

Posted By: cousinit99
Subject: does cm6000 have non volatile memory?
Date Posted: February 26, 2012 at 6:47 PM

Can anyone tell me whether or not the CM6000 has non-volatile memory? In other words, do the remotes need to be reprogrammed every time the battery dies or is disconnected? I can't find anything in the documentation for the brain or the remotes pertaining to this. Thanks

No conjectures, please.. Only chime in if you're sure, one way or the other.

Replies:

Posted By: tedmond
Date Posted: February 26, 2012 at 7:05 PM

the remotes do NOT need to reprogrammed if power is lost, or battery is disconnected for an extended period of time. The only issue is if it has a version 1-5 flash, it will hop into valet mode if the batt is disconnected (only when disarmed). If it was armed, it will stay armed even if power is removed and reapplied. With version 6.0+ it will not go into valet mode if disarmed.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: cousinit99
Date Posted: February 26, 2012 at 7:10 PM

Thanks Ted, very informative. This will help others too, I'm sure..

Posted By: mcove
Date Posted: February 28, 2012 at 7:48 PM

I installed a compustar cm6000as and a dball on a 2007 jeep wrangler with a manual tranny. after install was complete and 1 channel remotes were programmed I tested it. All worked in reservation mode, jeep stayed running ,closed doors and jeep shut down and locked. When I tried to remote start it lights flashed, ignition turned on but started never kicked in.Double checked everything and quit for a couple of days. when I tried to test it again I could not get reservation mode to work, jeep would not stay running. help