clifford 50.7x
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130748
Printed Date: September 10, 2025 at 9:55 AM
Topic: clifford 50.7x
Posted By: 1gr8rx7
Subject: clifford 50.7x
Date Posted: February 27, 2012 at 6:28 PM
I have a clifford 50.7 x with the basic installation remote start/ hood pin/ flashing light/power door locks. I have 2 actuators that will lift my pick up truck's lid which i would like to control with the clifford remote just open and close, which wires do I connect to in order to achieve this, i know I need the relays, I just need to know what wires I need to connecto to, thanks
Replies:
Posted By: howie ll
Date Posted: February 29, 2012 at 12:06 PM
Any of the aux output wires.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: 1gr8rx7
Date Posted: April 01, 2012 at 8:45 AM
Wher can I get an installers manual on this unit?
Posted By: howie ll
Date Posted: April 01, 2012 at 8:51 AM
Look up Viper 5901 in the Downloads/Manuals section, it's the same unit.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|