giordon g686 sp alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130789
Printed Date: July 06, 2025 at 2:22 AM
Topic: giordon g686 sp alarm
Posted By: d14099
Subject: giordon g686 sp alarm
Date Posted: March 01, 2012 at 7:56 PM
i think i have most of this figured out but i have a few questions.
what is the gate detection they are refering to pin # 3 and #4 positive and negative on the 12p connector.
off the yellow wired relay how does that hook up i dont understand
please help ------------- david
Replies:
Posted By: d14099
Date Posted: March 01, 2012 at 7:57 PM
oh i guess it would have been a smart idea to tell you what kind of vehicle i have its is a 1988 chevy silverado p/u with 5.7 auto and air
-------------
david
Posted By: tedmond
Date Posted: March 01, 2012 at 10:06 PM
you will probably need to post a picture of the install manual. Giordon remote starters are from china, and noone here deals with them for a fact.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: howie ll
Date Posted: March 02, 2012 at 5:05 AM
Oh here we go again Ted, the 3 month Giordon Jamboree of why won't it work?/why won't any pros touch this?/can anyone understand the manual?
wth do they mean by gate detection? Door open? FET gate?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: d14099
Date Posted: March 02, 2012 at 5:29 AM
exactly the manual is very vague i need ti know what they mean by positive and negative gate detection and how is the ignition kill relay hooked up i am assuming the wire goes to the positive side of the ign coil
-------------
david
Posted By: howie ll
Date Posted: March 02, 2012 at 6:43 AM
Actually it isn't! It's supposed to be a starter cut anti-grind and would normally be wired thus (in a reputable product).
Cut starter wire, key side to 87a
Starter side to 30
GWA (armed output) to 85
Ignition 1 (live on crank) to 86.
I don't know why I'm bothering, it will never work.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: d14099
Date Posted: March 02, 2012 at 2:03 PM
well first it isnt made in china its is made in korea not that it is any better or worse and i know its not a starter cut out, the alarm has a remote starter option, im looking for the ignition kill part of the alarm, this is what i have to work with can anyone help ????????????
-------------
david
Posted By: howie ll
Date Posted: March 02, 2012 at 3:18 PM
For safety reasons ignition kills are NOT recommended either here or in the US and I won't tell you how.
Why don't you simply show us the diagram?
Doesn't matter where it's made it's still a POS.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: tedmond
Date Posted: March 02, 2012 at 9:54 PM
howie ll wrote:
Doesn't matter where it's made it's still a POS.
DING DING DING ! Howie gets the prize  . sorry, but truth be told it's a pos unit. youre better off posting the diagram so we can see it at least. ------------- Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|