clifford gsx560
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130860
Printed Date: May 29, 2024 at 3:29 PM
Topic: clifford gsx560
Posted By: is200_turbo
Subject: clifford gsx560
Date Posted: March 09, 2012 at 3:11 PM
Hi all does anyone have any info on these they are made by gizmo I believe
In particular looking for install and user guides for this module
Can anyone help
Cheers
Andrew
Replies:
Posted By: howie ll
Date Posted: March 10, 2012 at 4:31 AM
Not a chance,some company in Hayes now imports some of the product. You could try Armour to see if they are keeping any tech info or there have been recent posts about Callguard on this site, look up the archives.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: March 10, 2012 at 4:33 AM
Not a chance,some company in Hayes now imports some of the product. You could try Armour to see if they are keeping any tech info or there have been recent posts about Callguard on this site, look up the archives.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: is200_turbo
Date Posted: March 10, 2012 at 7:19 AM
I had the Callguard unit installed on my last car i now have a new car and 2 off these units but they didn't come with a guide the guy is looking into it so thought i would ask on here as there is always a good knowledge from members on here.
cheers
Posted By: is200_turbo
Date Posted: March 13, 2012 at 8:34 AM
OK so i now have the manual for fitting there are some definite marked improvements software wise over the call-guard unit.
with the call-guard it was fitted via the horn output of the Clifford alarm, this went through a relay to take the negative trigger and covert it to a positive trigger which the unit will accept
however
it does state this will work with a warn-away alarm system well a Clifford does have the warn away feature so with a relay will it still work ? my thoughts are not as the warn away will be outputting a short pulse in negative form which may not be long enough for the relay to accept the signal and the call guard to respond (down side of mechanical switching i guess)
so it there a better way to wire it in ?
Posted By: is200_turbo
Date Posted: March 17, 2012 at 3:35 PM
ok so the BROWN / black wire on the Gismo unit, is also a multiplexed input so could this be piggy backed onto the Clifford siren output to allow the warn away feature etc ?
anyone
|