2004 350z remote start 791xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130902
Printed Date: July 05, 2025 at 12:41 AM

Topic: 2004 350z remote start 791xv

Posted By: kitster
Subject: 2004 350z remote start 791xv
Date Posted: March 13, 2012 at 12:43 PM

I have a 04 350z AT that I installed a 791xv in. Everything is working as it should with key in ignition including remote start. I was looking around for a XK07 to bypass immobilizer. I couldn't find one an ended up getting a XK09. I am a little confused on the firmware i should flash the XK09 with. I assume PKN3? It is in the compatible list. Just looking for a firmware to only bypass on remote start. So all that would be required is the CAN LOW/HIGH / PWR/GND and pink IGN and GWR to 791XV. Any GURU that chime in?

Replies:

Posted By: kitster
Date Posted: March 13, 2012 at 11:12 PM

Bump .. No one?

Well I guess I could throw on a 556UW but I didn't want to loose a key. I will try to flash firmware with PKN3 and hook it up. I was just hoping someone had an experience with XK09.

Posted By: kitster
Date Posted: March 16, 2012 at 11:44 PM

Solved!

I flashed XK09 with PKN3 and wired it as mentioned above and everything is working correctly. So now 791XV with shock, tilt, perimeter and 516U all working correctly on this convertible. Thought I would share posted_image