door trigger info needed
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130986
Printed Date: July 04, 2025 at 6:32 AM
Topic: door trigger info needed
Posted By: starplayerzz
Subject: door trigger info needed
Date Posted: March 21, 2012 at 11:28 PM
IM NEW to the entire car alarm installation stuff.i have every thing down to a science besides door triggers. my door trigger has 1 wire coming out from it. How do i wire it to my alarm .
Replies:
Posted By: starplayerzz
Date Posted: March 22, 2012 at 12:52 AM
Pleas someone i need help planing on installing today. i just ned to know how to jook up the door triggers
Posted By: i am an idiot
Date Posted: March 22, 2012 at 2:06 AM
It would really help us out if we knew what kind of a vehicle you are working with.
Posted By: oldspark
Date Posted: March 22, 2012 at 2:16 AM
So the door trigger is a grounding connection...
And probably closed when the door is open.
What more do you need?
Posted By: howie ll
Date Posted: March 22, 2012 at 2:32 AM
Alarm make and door trigger wire for the alarm?
And does the OP mean door OPEN trigger or door lock/unlock RELAY trigger?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: starplayerzz
Date Posted: March 22, 2012 at 7:27 AM
its a mazda 626 1991 model the door sensor has 1 wire coming out form the back how do i hook it up to the ala
rm.
Posted By: howie ll
Date Posted: March 22, 2012 at 7:33 AM
When you say sensor, do you mean push switch?
Take it to the wire on your alarm that says door trigger NEG.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: offroadzj
Date Posted: March 22, 2012 at 11:09 AM
Not sure if that is closer to the 92 626 or the 90 626 but here is the DEI all door trigger information for both. Use this wire instead of the actual door pin wire so you can get all doors off the one trigger (instead of having to use diodes to separate each door trigger)
1992:
Door Trigger RED / white - under dash fusebox
Trunk/Hatch Pin red - low in drivers kick
Hood Pin BROWN / white - underdash fusebox
1990:
Door Trigger RED / WHITE/ silver - driver kick panel
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: starplayerzz
Date Posted: March 22, 2012 at 11:12 AM
yes pin switch
|