Print Page | Close Window

cliffords sense and tell

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131006
Printed Date: July 06, 2025 at 11:06 AM


Topic: cliffords sense and tell

Posted By: cosworthkev
Subject: cliffords sense and tell
Date Posted: March 23, 2012 at 4:32 PM

Will cliffords sense and tell work with the concept 600 g4 alarm system.



Replies:

Posted By: howie ll
Date Posted: March 24, 2012 at 8:25 AM
Yes, but only "Intellisense IV".
And yes I do have one!

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: howie ll
Date Posted: March 24, 2012 at 8:27 AM
By the way, I believe it won't work with your dual zone prox, try it and see, I've used it on G4 Con 300 and had to use a 508d.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: cosworthkev
Date Posted: March 24, 2012 at 9:57 AM
Hi thanks for replying to my post just wondering if the Intellisense IV wont work with the dual zone proximersity sensor IV how does the Intellisense IV know when to verbaley warn someone who,s to near too the car and set off a full alarm state if movement is detected inside the car, is the Intellisense IV also known as the Intellivoice IV, sorry to be a pain but what is a 508d, and lastly do you know where i could get a Intellisense IV at a good price. Once again thanks for your help Kevin C.




Posted By: howie ll
Date Posted: March 24, 2012 at 11:27 AM
I've already said I don't think the dual zone prox sensor will work with the I/Sense IV, you have to try it and see.
508d is a general purpose replacement for the OEM proximity.
I have a used guaranteed working unit, complete with internal speaker, external siren plus data lead.
They haven't made them new for about 10 years.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.





Print Page | Close Window