03 f150 door trigger viper 5704
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131048
Printed Date: May 04, 2024 at 3:39 PM
Topic: 03 f150 door trigger viper 5704
Posted By: 03fx4604
Subject: 03 f150 door trigger viper 5704
Date Posted: March 26, 2012 at 11:49 PM
Ok this is the last part of my viper install that i havent figured out.
The green wire coming from the viper 24 pin connector (-) door trigger input (n/c or n/c) is supposed to go to the stock Black yellow(-) and Blank pink (-)
Am i using both stock wires or just one? Others have said that i need a diode for this to function correctly, and others have said that i can wire the green viper wire to the dome light wire, but this will only tell me a door is open not which door is open is this true?
Thanks guys
Replies:
Posted By: chev104275
Date Posted: March 27, 2012 at 8:05 AM
Door Trigger blk/yel (L) & blk/pnk (R) - each door harness
Notes: The BLACK / YELLOW catches the driver door and the BLACK/ pink catches the passenger door. The wires are found in their respective door harness. On the Super Crew the rear door trigger is BLACK/ lt. blue low in the driver kick panel. Use all wires and diode isolate each from the GEM module, refer to DirectFax document 1076 for wiring information.
All wires may also be found at the GEM module located above the fuse box. On models without a dome light delay use ORANGE / lt. green (-) at the light switch.
1076 Document can be found at the top of the page under downloads. Just type in 1076 in the search box and download it
-------------
If i Can't Install it I Don't need it Joe
Posted By: 03fx4604
Date Posted: March 27, 2012 at 8:34 AM
Ok i have the supercrew, so ill be using all three wires, so the green wire from the viper gets spliced into all 3?
Posted By: 03fx4604
Date Posted: March 27, 2012 at 8:38 AM
im confused on the number of diodes i need, according to the 1076 download theres 4 door trigger wires and 8 diodes i was under the imprsseion i only need 3 diodes.
Posted By: tedmond
Date Posted: March 27, 2012 at 10:30 PM
you will use 6 diodes total.
3 inline with the door trigger to prevent false triggers from the GEM, and another 3 to isolate each circuit from one another.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: 03fx4604
Date Posted: March 28, 2012 at 3:53 PM
tedmond wrote:
you will use 6 diodes total.
3 inline with the door trigger to prevent false triggers from the GEM, and another 3 to isolate each circuit from one another.
got it thanks for the help.
My other problem is with the door lock wires on the truck, i dont have factory keyless entry so i have type c five wire locks.The door lock wires on the truck are
pink/green-unlock and pink / YELLOW-lock the problem is i cant find either of those wires in the drivers kick panel.
When i pop the lock switch off the door the harness has the pink/green unlock wire i spliced into it directly there and it works, but there is no pink / YELLOW lock wire only 2 black wires, a brown wire, and a large dark green wire i tested all of them and none of them are the lock wire, so where is the pink / YELLOW wire for the locks????
Posted By: chev104275
Date Posted: March 28, 2012 at 4:48 PM
Pin 7 should be pink / YELLOW and pin 3 should be pink/green
You can also get them in the door boot I also have an 03 super crew and that's where I grabbed my locks
Are you sure you don't have factory keyless I don't think I've ever seen a super crew with out it
-------------
If i Can't Install it I Don't need it Joe
Posted By: 03fx4604
Date Posted: March 28, 2012 at 4:57 PM
chev104275 wrote:
Pin 7 should be pink / YELLOW and pin 3 should be pink/green
You can also get them in the door boot I also have an 03 super crew and that's where I grabbed my locks
Are you sure you don't have factory keyless I don't think I've ever seen a super crew with out it
Im pretty sure i dont have a keypad on my door, or does keylees mean just the stock remote?
Even so on the harness at the lock switch theres 5 wires and pink / YELLOW isnt one of them.
Posted By: chev104275
Date Posted: March 28, 2012 at 5:51 PM
Remote keyless no door pad what is in pin 7 ? If the locks work from the switch there has to be a lock wire
-------------
If i Can't Install it I Don't need it Joe
Posted By: 03fx4604
Date Posted: March 28, 2012 at 7:33 PM
[QUOTE=chev104275]Remote keyless no door pad what is in pin 7 ? If the locks work from the switch there has to be a lock wire[/QUOTE
my door lock 8 pin switch is as fallows
1.Black
2.Empty
3.pink/green-unlock
4.black
5.bluishgray/black
6.empty
7.brown
8.empty
Posted By: 03fx4604
Date Posted: March 28, 2012 at 7:40 PM
My next problem is still with the door triggers i got my 6 diodes and wired them according it to the 1076 diagram and heres what i have
3 wires, BLACK/ pink,BLACK / YELLOW,BLACK/ blue the line on the diodes is facing away from the kick panel harness, my second set of diodes is wired between the first set and the kick panel harness with the line on the diode facing away from the green alarm wire, but im still receiving a door open signal on my remote when the system is armed and all the doors are closed any thoughts?
Posted By: tedmond
Date Posted: March 28, 2012 at 8:23 PM
you use 3 diodes INLINE from the door trigger to the bcm. then the other 3 are connected towards the door trigger side, not bcm. if that makes any sense.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: chev104275
Date Posted: March 29, 2012 at 5:18 AM
I just pulled my switch panel in my truck and pin 7 is pink / YELLOW maybe someone needed to do a repair and used a different color wire ? Did you test pin 7
-------------
If i Can't Install it I Don't need it Joe
Posted By: 03fx4604
Date Posted: April 03, 2012 at 2:37 PM
Ok so i just got back from vacation and still need some help.
The number 7 pin on the door lock/unlock switch isnt pink / YELLOW but it is the lock wire, do i need a relay for this to function properly because it will only unlock the doors if a tap the wire from the viper to the wire from the switch.
If i connect the two it doesnt work. if that makes any sense
Posted By: chev104275
Date Posted: April 03, 2012 at 5:46 PM
So just tapping your wire from the viper system to the lock wire in the truck makes the door locks lock ? With out using the remote ? Is that wire always grounded ?
-------------
If i Can't Install it I Don't need it Joe
Posted By: 03fx4604
Date Posted: April 03, 2012 at 6:02 PM
yes just tapping the wires together makes the doors lock if i permanately conncect the door lock wire and the number 7pin wire at the switch pressing the button on the alarm remote does nothing as if it were grounding out the lock wire.
Posted By: chev104275
Date Posted: April 03, 2012 at 7:42 PM
Did you test the systems output make sure its not staying on ground ? Could have a bad module
-------------
If i Can't Install it I Don't need it Joe
|