viper 5301 a factory alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131063
Printed Date: May 14, 2025 at 7:37 PM
Topic: viper 5301 a factory alarm
Posted By: lime4x4
Subject: viper 5301 a factory alarm
Date Posted: March 28, 2012 at 11:27 AM
I installed a viper 5301 along with the dball module. I'm using D2D. I don't have the viper wires hooked up for the factory alarm to arm or disarm or they needed? Is that being taken care of thru the dball module which isn't hooked up to my factory arm or disarm wires either
Replies:
Posted By: chev104275
Date Posted: March 28, 2012 at 1:08 PM
What kind of car is this in ?
-------------
If i Can't Install it I Don't need it Joe
Posted By: lime4x4
Date Posted: March 28, 2012 at 1:18 PM
sorry keep forgetting that. it's on a 2001 chevy silverado
Posted By: tedmond
Date Posted: March 28, 2012 at 4:17 PM
the dball will take care of the disarm/arm for you. no need for extra wires to the car.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: lime4x4
Date Posted: March 28, 2012 at 4:26 PM
I took noticed today that sometimes when using the viper remote remote to unlock the doors the dome lamps don't work. The only wires i have connected from the viper into the bcm is the horn and parking lites. I have the dball connected to the bcm driver's door input for the rap feature.
Posted By: tedmond
Date Posted: March 28, 2012 at 8:24 PM
if you want the door lamp, you will need to wire that manually. the dball does not turn on dome supervision/proximity lighting.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: lime4x4
Date Posted: March 28, 2012 at 9:02 PM
So i take i'll have to hook the H1/9 wire from the viper to the ground side of the dome light wiring?
Posted By: tedmond
Date Posted: March 29, 2012 at 6:57 PM
precisely.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|