Print Page | Close Window

remove invisibeam system

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131201
Printed Date: January 26, 2022 at 8:26 PM


Topic: remove invisibeam system

Posted By: mattia-ss
Subject: remove invisibeam system
Date Posted: April 17, 2012 at 3:00 PM

Hello all!

I just bought a Lincoln town car 1977. One of the previous owners installed some kind of tracking system (the seller told me) or is it just an alarm??. It´s called Invisibeam perimeter detection. The only numbers I find on the box is 000005668 and a date 01/05/90. I want to remove it and need a wiring diagram. Anyone know if its still possible to get? I googled of course but came up with nothing.

Mattias




Replies:

Posted By: howie ll
Date Posted: April 17, 2012 at 3:48 PM
Definitely not a tracking system, more likely a talking alarm, no idea what make, just follow the wiring to remove.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: tommy...
Date Posted: April 18, 2012 at 10:16 AM
https://www.the12volt.com/installbay/forum_posts.asp?tid=94921&KW=esoteric

Seems as if DEI product, now... At least the sensor...

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!




Posted By: mattia-ss
Date Posted: April 18, 2012 at 11:37 AM
Would it help if i posted a pic of the box?




Posted By: tommy...
Date Posted: April 18, 2012 at 11:54 AM
There really isnt anything available... Follow ALL the wires and Dis-connect them at their source and fix where it was attached... Even with the Install Manual, there arent directions to de-install...

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!




Posted By: tommy...
Date Posted: April 18, 2012 at 11:55 AM
Its a Basic System... nothing to elaborate... Any shop will take it out, for around an hour labor...Ish

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!




Posted By: Mark Mizenko
Date Posted: April 18, 2012 at 12:33 PM

If it's an original Invsabeam system, with voice warning, it's worth a few dollars. 

 Make sure you get all the components of the system, try not to leave anything from the system in the vehicle. 

Do you have invisabeam remotes for the system?  You may have a add on, or complete alarm w/ single or dual voice.  Did you ever hear it talk?





Posted By: howie ll
Date Posted: April 18, 2012 at 12:50 PM
The problem would be to make it work without remotes and working, it's unlikely you will be able to get spares parts.
Being having this problem for the last 10 years with the Clifford Concept 50 and 50X, a Europe only unit that came out around 1992. We just rip them out and replace with newer units.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: mattia-ss
Date Posted: April 22, 2012 at 11:46 AM
Mark Mizenko wrote:

If it's an original Invsabeam system, with voice warning, it's worth a few dollars. 

 Make sure you get all the components of the system, try not to leave anything from the system in the vehicle. 

Do you have invisabeam remotes for the system?  You may have a add on, or complete alarm w/ single or dual voice.  Did you ever hear it talk?


There is a remote. Everytime I cut the power (like remove the battery)  a red aftermarket lamp starts to blink on the dashboard and I need to deactivate it in order for the car to start.





Posted By: tek1001
Date Posted: June 01, 2012 at 11:19 PM
If you still need the wiring i have it pm me.

-------------
tek1001




Posted By: chibuilder
Date Posted: August 19, 2012 at 3:49 PM
Does anyone know how to disable this alarm without a remote? I bought a car that has a 1989 invisibeam and I think it has triggered and locked the steering wheel/preventing a start-up and I don't have the remote so need to disable.




Posted By: howie ll
Date Posted: August 19, 2012 at 4:47 PM
Last poster, what vehicle? What you've described sounds like a physical impossibility.
Again read the previous posts where two of us say "follow the wiring".

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: i am an idiot
Date Posted: August 19, 2012 at 8:38 PM
Have you tried to just unplug the brain?




Posted By: fastmovn1
Date Posted: January 25, 2014 at 1:44 PM
tek1001 wrote:

If you still need the wiring i have it pm me.
Hi Is it possible for you to email me a copy of the invisibeam install wiring diagrams..I would be so thankful...Thanks,philip

-------------
Fastmovn1




Posted By: alfordjody
Date Posted: February 01, 2015 at 3:50 AM
Tek1001 Do you still have the wiring for the Invisibeam systems? I have 2 of the invisibeam plus systems and would like to use one for a show truck and the other just for around the house to play with and would like to know the wiring for them.





Print Page | Close Window