2003 dodge dakota alarm/ remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131230
Printed Date: May 15, 2025 at 2:06 AM

Topic: 2003 dodge dakota alarm/ remote start

Posted By: dodgethis03
Subject: 2003 dodge dakota alarm/ remote start
Date Posted: April 20, 2012 at 11:39 AM

I am trying to put a viper 5601 alarm/ remote start into my truck. It is a quad cad truck but I am a little stuck on how to wirer the door locks. I know it is calling for a 300 ohm and 820 ohm resistors. I have also read somewhere that says you may need some relays also. Any help would be great.

Replies:

Posted By: howie ll
Date Posted: April 20, 2012 at 12:48 PM

There's a 451 module for Chrysler from DEI but if not use this diagram:-
CZ3_multiplex_via_relays.bmp

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: dodgethis03
Date Posted: April 20, 2012 at 1:17 PM

Thanks a lot. I will try that. Thank you again.

Posted By: dodgethis03
Date Posted: April 20, 2012 at 1:22 PM

What are those things right after the alarm?

Posted By: chev104275
Date Posted: April 20, 2012 at 1:28 PM

Diodes

-------------
If i Can't Install it I Don't need it Joe

Posted By: dodgethis03
Date Posted: April 20, 2012 at 2:08 PM

So I am guessing that the dei 451 is going to be the fastest way to go. Found one that comes with resistors and it looks like it will plug right into my alarm.

Print Page | Close Window