Print Page | Close Window

compustar 6000 brain

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131353
Printed Date: May 18, 2025 at 9:09 PM


Topic: compustar 6000 brain

Posted By: BrandonClaps
Subject: compustar 6000 brain
Date Posted: May 05, 2012 at 12:17 AM

Installed a Compustar 6000 brain and I'm trying to program the remotes but as soon as I turn on the ignition the alarm goes off. I can't disarm the alarm because the remotes aren't programmed yet.

I've tried pulling all the wires except power, ground, ignition and accessory and it still cycles the alarm and the only way to stop it is to pull the fuse. If I pull the ignition wire the alarm doesn't go off, but I can't program the remote then. I've even tried to re-flash the brain and blade and still not working.

HELP!



Replies:

Posted By: soundnsecurity
Date Posted: May 05, 2012 at 9:39 AM
every alarm has a manual disarm procedure. if you have the owners manual for that alarm im sure it will tell you what to do.

-------------


Print Page | Close Window