smart start set up

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131437
Printed Date: May 20, 2024 at 10:16 AM

Topic: smart start set up

Posted By: prdjr165
Subject: smart start set up
Date Posted: May 19, 2012 at 3:37 AM

having trouble getting a solid yellow light so I can activate my VSS4000 matched with a viper 5101,I get a solid green light but the yellow always flashes rapidly no matter where i have the car.

Replies:

Posted By: racerjames76
Date Posted: May 19, 2012 at 8:50 AM

https://kb.directed.com/KnowledgebaseArticle12172.aspx

Google is our friend posted_image

Obviously, try moving the car to a new location and unplug the entire ss module, replug it all, and see if that works, dash out of the way ss module out in the open away from power lines buildings etc. Once it makes connection it usually doesn't drop the connection.

Hope it helps.

Posted By: racerjames76
Date Posted: May 19, 2012 at 8:52 AM

Did the unit pass the initialize computer test? what were the readings listed as the response?

Posted By: prdjr165
Date Posted: May 19, 2012 at 9:15 AM

did not pass any initialize test.logged on to activation page with username and password and filled out all info on install device step 2,get diagnostic result failed because of yellow light not solid.

Posted By: prdjr165
Date Posted: May 21, 2012 at 4:35 AM

still no luck-guess i'll have to call tech support..this is a remanufactured unit.

Print Page | Close Window