08 nissan altima ignition wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131490
Printed Date: May 11, 2024 at 1:05 AM
Topic: 08 nissan altima ignition wire
Posted By: tbird2340
Subject: 08 nissan altima ignition wire
Date Posted: May 26, 2012 at 9:37 PM
Does anyone have a picture of where an ignition wire is for an 08 Altima?
I found this:
IGNITION 1 RED / BLACK (+) @ BCM, (BLACK, 40-PIN PLUG), PIN 11, NOTE #2
IGNITION 2 BROWN / WHITE (-) @ BCM, (GRAY, 40-PIN PLUG), PIN 16, NOTE #2
But not sure if it's correct and also can't find where this BCM module is at..
Thanks
Replies:
Posted By: kreg357
Date Posted: May 26, 2012 at 9:58 PM
Here is a nice Pictorial on a 2010 Altima : https://www.the12volt.com/installbay/forum_posts.asp~TID~129706~PN~1~TPN~1
2007 through 2012 should be similar. It has a picture of the two wires you are looking for and details on the BCM location.
------------- Soldering is fun!
Posted By: tbird2340
Date Posted: May 26, 2012 at 10:12 PM
Thanks so much.
Posted By: howie ll
Date Posted: May 27, 2012 at 1:47 AM
Huh? Kregg, think I just answered another version of this post on the Altima thread!
------------- Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|