audiovox

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131571
Printed Date: April 28, 2024 at 1:42 AM

Topic: audiovox

Posted By: bluegold
Subject: audiovox
Date Posted: June 08, 2012 at 6:50 PM

I currently have a Audiovox Pursuit Pro-9675FT4 installed in my van. Can I remove the Pro-9675FT4 and install a model APS 996A Informer series with a minium amount of re-wiring? If so what changes would I have to make? And is it worth the change?

Thanks for ther help,

bluegold

Replies:

Posted By: racerjames76
Date Posted: June 09, 2012 at 8:25 AM

Not sure if the 9675 has alarm built in, but the main differences are the plugs.

The 6 pin main harness should be the same. The bypass if present can be used. You may have to find door triggers, horn, siren, and mount the LED and shock sensor.

Not a huge job, but you may find it easier to just remove and start over.

Posted By: bluegold
Date Posted: June 09, 2012 at 10:14 AM

Thank you very much for the information.

bluegold

Print Page | Close Window