alarm engine start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131599
Printed Date: May 01, 2024 at 7:18 PM
Topic: alarm engine start
Posted By: benelectrical
Subject: alarm engine start
Date Posted: June 13, 2012 at 6:07 AM
Hey quick questions guys
Im gonna fit a viper alarm and immbolizer to my car soon. this alarm doesnt come with the engine start feature.
im brain storming ideas to get this to work.
my idea is. a standard relay wired like this.
30 - B+ ( link between 30 and 86)
85 - Earth ( which is connected to alarm aux output)
86 - Ign (link between 86 and 30 )
87 - start motor (start wire, starter motor side)
please let me know what u think? -------------
Replies:
Posted By: benelectrical
Date Posted: June 13, 2012 at 6:11 AM
just relised once i loose signal from alarm out i will loose the ign feed which will cut out motor. any ideas
-------------
Posted By: benelectrical
Date Posted: June 13, 2012 at 8:36 AM
i have a pretty starded alarm, i am wanting to add on engine start via the ' aux" from the keypad, anyone know how?
-------------
Posted By: howie ll
Date Posted: June 13, 2012 at 12:45 PM
Buy a Viper R/S to go with your alarm, much safer.
Google Viper products to find an R/S controlled by their alarms.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: June 13, 2012 at 12:57 PM
Avital 4003L is compatible.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: benelectrical
Date Posted: June 16, 2012 at 10:01 AM
hey what if i use this wiring diagram??
-------------
Posted By: howie ll
Date Posted: June 16, 2012 at 11:00 AM
Simple..no safety cut outs such as hood switch over-revving, wrong person hot wiring. This comes up every couple of months and gets blown away, it's too impractical. Cheaper to buy an add on as mentioned before.
You're becoming the daft question specialist aren't you.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: benelectrical
Date Posted: June 16, 2012 at 11:06 AM
sorry, just thought id ask. see if there was any tricks u guys have thought of.
-------------
Posted By: howie ll
Date Posted: June 16, 2012 at 11:12 AM
Yes, kludges don't work.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: benelectrical
Date Posted: June 27, 2012 at 4:48 AM
hey iv just found this product. will this work on after market alarm systems ( viper)
the car does not have body control module -
https://docs.google.com/viewer?a=v&q=cache:nK597LeT_FsJ: -------------
Posted By: howie ll
Date Posted: June 27, 2012 at 5:01 AM
And along with your kludges the link doesn't work.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: benelectrical
Date Posted: June 27, 2012 at 6:55 AM
sorry. please time in google.
GM Remote Start System Upgrade Module 1900G
and go to the 2nd one down. its a pdf file -------------
Posted By: howie ll
Date Posted: June 27, 2012 at 7:21 AM
The problem is you keep coming up with ideas that simply won't work without a lot of time, trouble and expense.
They've all been done to death before, check the archives and simply won't work as well as a (relatively) cheap add-on such as the Avital I mentioned some time ago.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: June 27, 2012 at 7:25 AM
The 1900G is simply a range extender for existing GM factory/dealer installed remote starts.
It isn't compatible with your Viper 460/80XV.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: June 27, 2012 at 7:28 AM
And what was the relevance if any to body control modules?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|
