remote programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131611
Printed Date: June 19, 2025 at 1:42 PM

Topic: remote programming

Posted By: jshep10
Subject: remote programming
Date Posted: June 13, 2012 at 6:24 PM

Have an aftermarket car alarm installed in my car, and have just purchased new remotes for the alarm that match the fcc id of the old remotes. I cannot figure out how to program the new remotes for my alarm. I cannot find any info on the alarm itself except for the fcc id that is: j5523518r which is coming back to Delta alarm company? It is a 4 button remote. Any help would be greatly appreciated!

Replies:

Posted By: racerjames76
Date Posted: June 15, 2012 at 8:07 AM

I think we need more information on this. Is it a factory alarm, or aftermarket? Who installed it? We need to know the manufacturer and part number of the unit to look up instructions. posted_image

-------------
To master and control electricity is perfection. *evil laugh*

Posted By: tommy...
Date Posted: June 15, 2012 at 8:12 AM

What about posting a link of what the remotes look like. It will speed up the process, probably... Was there any markings on Alarm Brain...? Can you take pics, upload to photobucket, or something...? Also, programming instructions usually come with the new remotes. Call the company you purchased them from...

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Posted By: jshep10
Date Posted: June 15, 2012 at 4:32 PM

It is an aftermarket car alarm. I tried to find a model # on the "brain" but only could find a FCC Id j5523518r. That FCC Id is registered to delta alarm company. The remote is a four button remote with an FCC id of oartxam2000, which matches the original remotes that came with the install. I purchased the new remote from eBay and I didn't come with programming instructions. Thanks for all your help!

Posted By: tommy...
Date Posted: June 15, 2012 at 4:48 PM

Can you take a pic of the remote? Might help...

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Posted By: jshep10
Date Posted: June 15, 2012 at 10:55 PM

https://www.remotesunlimited.com/catalog/product_info.php?products_id=504&childSpecID=0&speclinkID=&type=fcc