06 chrysler 300 evo chr

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131652
Printed Date: May 10, 2025 at 11:40 PM

Topic: 06 chrysler 300 evo chr

Posted By: ziggyb222
Subject: 06 chrysler 300 evo chr
Date Posted: June 19, 2012 at 2:09 PM

Going to do a Viper 4103v starter in a 2006 Chrysler 300. I want to use the EVO-CHR and the t-harness set up. It is a non-tipstart car. What t-harness do I need and should I do wire to wire connections or will the data work between the two.. Thanks in advance!!!!!!!

Replies:

Posted By: ziggyb222
Date Posted: June 22, 2012 at 3:11 PM

Anyone with ideas on this setup?????

Posted By: dasbogie
Date Posted: June 22, 2012 at 9:05 PM

Thar-chr2 is the t-harness you need. On fortins website they list remote starters their products are compatible with d2d. Viper is not one listed

-------------
Advanced

Posted By: ziggyb222
Date Posted: June 23, 2012 at 12:07 AM

Thanks!!! I like wire to wire myself..... Will get the T-Harness and try it.... thanks!!!!

Print Page | Close Window