Print Page | Close Window

parking lights not flashing python 991

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131705
Printed Date: May 29, 2024 at 2:09 AM


Topic: parking lights not flashing python 991

Posted By: sicivic13
Subject: parking lights not flashing python 991
Date Posted: June 27, 2012 at 8:08 AM

I just installed a Python 991 to replace the Python 871xp I had in my 2008 Honda Civic Si. Everything is working with the exception of the parking lights. I tapped into the same wires used for the previous alarm. The 871xp had one white wire that was used to tap into the parking light wire. The 991 has 2 wires - the white wire is for the parking light output and the WHITE/ brown wire is for the parking light isolation wire (pin 87a of onboard relay). I tapped the white wire straight into the (+) Parking Light Wire at the fuse box but I have no idea what the WHITE/ brown wire is for. Could anyone please help me resolve this problem?

Thanks,
Steve




Replies:

Posted By: sicivic13
Date Posted: June 27, 2012 at 9:12 AM
Does the 991 have a jumper to change the polarity for the parking lights?



Posted By: sicivic13
Date Posted: June 27, 2012 at 9:25 AM
The 991 does have an internal jumper for the parking light polarity. I will check to make sure it is set as positive tonight.


Print Page | Close Window