smart start viper
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131725
Printed Date: June 20, 2025 at 4:41 AM
Topic: smart start viper
Posted By: rescu2000
Subject: smart start viper
Date Posted: June 30, 2012 at 11:55 PM
Does anyone have the install manual for the vs5000 from viper? The downloads section just appeared to have the LCD 5000 version.
Also, does anyone know if the vs5000 has a connection for the chall and the smart start module (separately) or will I have to wire-to-wire the chall in (as I have read on other models). If I do have to wire it up, is it pretty straightforward? (ie, yellow to yellow, etc)
Thanks so much for the help. There is a ton of good info here!
Replies:
Posted By: rescu2000
Date Posted: July 01, 2012 at 12:27 AM
Ok found the guide under 560xv. Any info on the d2d ports?
Posted By: rescu2000
Date Posted: July 07, 2012 at 9:23 AM
For anyone else that might need to know, the d2d is used for the smart start module so the chall or flcan module has to be w2w. The w2w connection is only slightly more work but pretty easy to follow in the install guide. I do have one other issue on this vehicle but I already have another thread on it so this one can be closed.
|