python 991 stg1 alarm headache
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131731
Printed Date: June 20, 2025 at 3:32 PM
Topic: python 991 stg1 alarm headache
Posted By: jtl88
Subject: python 991 stg1 alarm headache
Date Posted: July 01, 2012 at 6:05 PM
Hi,
I have an Python 991 installed on a manual transmission car. It has a glass sensor and a external shock sensor. I believe how this system works is the built in shock sensor is STG1 and the external shock sensor is STG2/Full trigger.
Problem: Everytime I arm the car, within 2-5 minutes, the warn-away would ALWAYS trigger. I tried adjusting the sensitivity and it does not change anything whether it is set at 0 or 15.
I am wondering if anyone can help me out. Any help will be appreciated. Thanks
Replies:
Posted By: jtl88
Date Posted: July 01, 2012 at 6:08 PM
Adding additional info: Car is a 2011 Subaru Impreza 5sp. Also, to my knowledge, all other functions are working correctly. I just dont know what is causing this false trigger everytime I arm the car. Happens even if the car is in an isolated area.
Posted By: t&t tech
Date Posted: July 01, 2012 at 8:34 PM
Have you verified if the false trigger occurs when you plug out the off board shock sensor?
Posted By: jtl88
Date Posted: July 02, 2012 at 7:57 PM
Yes. This happens even without that offboard shock sensor.
Posted By: jtl88
Date Posted: July 05, 2012 at 8:54 PM
bump.
Does anyone have any ideas?? I disconnected the external stock sensor and the stage 1 trigger is still going off randomly after I arm the system each time.
Posted By: howie ll
Date Posted: July 06, 2012 at 12:57 AM
Have you pulled the glass break as well then with your owners manual, done a diagnostic check?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: jtl88
Date Posted: July 29, 2012 at 7:56 PM
Glass sensor and external shock sensor pulled. Still happens.
Cant really do a diagnostics... its only a warn away, so theres no lights flashing.
Someone please help me. =(
Posted By: howie ll
Date Posted: July 30, 2012 at 1:42 AM
Are they the only external sensors?
If there's an internal shock, turn it down.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: jtl88
Date Posted: July 30, 2012 at 6:33 AM
howie ll wrote:
Are they the only external sensors?
If there's an internal shock, turn it down.
I tried adjusting the internal shock alrdy.. The alarm is current at 0 for sensitivity and the warn-away is still triggering. :(
Posted By: soundnsecurity
Date Posted: July 30, 2012 at 10:23 AM
have you tried sitting inside the car and waiting for the warm away to happen? maybe its some function of the car that is making vibrations after you turn the car off.
-------------
Posted By: jtl88
Date Posted: July 31, 2012 at 6:09 PM
soundnsecurity wrote:
have you tried sitting inside the car and waiting for the warm away to happen? maybe its some function of the car that is making vibrations after you turn the car off.
Just tried it hoping I find something. I sat in there for 4 minutes (not moving) dead silence..... then the warn-away triggers. I did not hear anything nor feel anything. No idea what is causing the trigger. =(
Posted By: jtl88
Date Posted: August 01, 2012 at 7:14 PM
bumppp. Someone plz help me. =(
|