python / viper external shock sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131808
Printed Date: May 21, 2024 at 9:14 AM

Topic: python / viper external shock sensor

Posted By: gregbbb
Subject: python / viper external shock sensor
Date Posted: July 12, 2012 at 1:59 PM

I see that DEI has gone back to an External shock sensor does any one know what the green wire (-) warn on the shock sensor hooks up to?

I was going to hook it to green (-) door trigger is this right?

Thanks

Replies:

Posted By: howie ll
Date Posted: July 12, 2012 at 2:19 PM

Join the green to the blue then to the blue trigger wire of the alarm-R/S.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: gregbbb
Date Posted: July 12, 2012 at 2:33 PM

There is a green loop wire at the end of one plug that hooks the green and blue together does this plug into the sensor?

If so then the one that plugs into the brain has the long green wire what do i hook that to?

There is no blue trigger wire on r/s just green (-) and violet (+)

Posted By: howie ll
Date Posted: July 12, 2012 at 5:50 PM

What colour does it use for hood or trunk trigger then?
Join but diode separate.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Print Page | Close Window