hornet 750t, re fitting to new car

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131812
Printed Date: July 16, 2025 at 2:49 AM

Topic: hornet 750t, re fitting to new car

Posted By: stoo2k
Subject: hornet 750t, re fitting to new car
Date Posted: July 13, 2012 at 4:28 AM

Hi there.
Really need some help.
I removed my old Hornet 750T alarm from my old car and didnt label the wires. Its been sat in a box for a few years and now i have bought an older type car again i want it put to some use.
I have tried everywhere to get hold of some wiring diagrams or description of what each colour wire does.
The closest i have come is for the wiring diagram from the hornet 742 model.
Most of the wire colours are accounted for but some are not and the plugs are different (obviously being of a different model type).
Here are a few pics of it:

[IMG]https://i188.photobucket.com/albums/z135/stooieshenton/4789e37a.jpg[/IMG]
[IMG]https://i188.photobucket.com/albums/z135/stooieshenton/a6bf4312.jpg[/IMG]
[IMG]https://i188.photobucket.com/albums/z135/stooieshenton/01312af3.jpg[/IMG]

Its obvious to me which are the imobiliser wires, led and siren. The rest, i dont really want to guess using the 742 as my guide considering quite a few wires are not accounted for.

Any help is greatly appreciated.

Replies:

Posted By: stoo2k
Date Posted: July 13, 2012 at 4:36 AM

https://i188.photobucket.com/albums/z135/stooieshenton/4789e37a.jpg
https://i188.photobucket.com/albums/z135/stooieshenton/a6bf4312.jpg
https://i188.photobucket.com/albums/z135/stooieshenton/01312af3.jpg

Posted By: howie ll
Date Posted: July 13, 2012 at 6:25 AM

For about the last 8 years it's been sold as an Avital Maxx 1.
I have the install guide if you would PM me with your email address.
Hope you have a meter, if those black leads weren't tagged, it's a bin job!
Mid you AFIK as a Clifford installer for 20 years plus, it's a POS anyway, just like the A6061 Toad both from Taiwan.
Clifford (before DEI took them over) bought it out as an entry -level competitor against the Concept 300.
Sold shed loads of 300s, none of them.
If you do decide to install it, the BLACK/ white must be grounded.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: stoo2k
Date Posted: July 13, 2012 at 7:11 AM

Message sent.

Thankss for the reply.

Posted By: ukhunter
Date Posted: July 29, 2012 at 11:05 AM

Hi Guys,that's just what Im looking for too,hope you don't mind if I pm you Howie posted_image