viper 5002 lock access weirdness
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131836
Printed Date: July 16, 2025 at 9:31 AM
Topic: viper 5002 lock access weirdness
Posted By: jlinscheid
Subject: viper 5002 lock access weirdness
Date Posted: July 16, 2012 at 4:07 PM
Unit has been installed for 2˝ years, worked fine all that time. Now all of a sudden the remote will no longer lock or arm it. The doors lock automatically upon startup. I don't have a bitwriter, so I'm stuck with valet mode programming. Using the installation manual steps on programming via tables and the valet button, door opening and ignition steps don't seem to do anything, although I do get the chirps telling me it has accepted the changes. The panic button will not trip the siren. I can still manually lock and unlock the car, but the remote is not doing me much good.
Is there a master factory reset I'm not seeing in the manual?
Any ideas? Thanks, Dan
Honda Civic 2002
Dei Viper 5002
remote set to vehicle 1
Replies:
Posted By: lurch228
Date Posted: November 11, 2012 at 6:18 AM
Sounds like a bad brain, programming shouldn't change by itself.
|