programming cm6200s,

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131952
Printed Date: May 23, 2024 at 6:16 PM

Topic: programming cm6200s,

Posted By: amigoxp
Subject: programming cm6200s,
Date Posted: August 05, 2012 at 9:56 AM

Hi,

I need help for entering in menu 4 of CM6200S. I n manual, it's written to push

Lock + Key/Start for 2.5
seconds then Lock + Key/
Start for 2.5 seconds

Does i must push on Lock and Key/start at the same time for 2.5 secondes or i must push and relase Lock follow by Key/Start for 2.5 seconds. The combination is not clear in my head. I need your help.

thanks

Replies:

Posted By: kreg357
Date Posted: August 05, 2012 at 10:43 AM

Press ( simultaneously ) buttons 1 and 4 at the same time and hold for 2.5 seconds, release, then press ( simultaneously ) buttons 1 and 4 again for 2.5 seconds. That will get you into Menu 4 ( but an OP-500 will make life much easier and get you into the Special Options menus... ).

Button 1 = Lock Button 4 = Key/Start

-------------
Soldering is fun!

Posted By: amigoxp
Date Posted: August 05, 2012 at 6:11 PM

Thanks kreg

Print Page | Close Window