mazda3 clutch bypass
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132120
Printed Date: May 14, 2025 at 2:10 AM
Topic: mazda3 clutch bypass
Posted By: chek
Subject: mazda3 clutch bypass
Date Posted: September 01, 2012 at 8:31 PM
Any tricks? It tests positive when clutch is pressed but it won't bypass no matter what I try.......
Replies:
Posted By: i am an idiot
Date Posted: September 01, 2012 at 10:58 PM
If you remote start the vehicle while you press the clutch, does it start?
Posted By: chek
Date Posted: September 02, 2012 at 1:34 PM
Yes it starts with the clutch in...I'm wondering if it needs to see a certain resistance value...
Posted By: Velocity Motors
Date Posted: September 02, 2012 at 1:48 PM
Are you sure you have the right clutch wires ? Disconnect the clutch wire connector and see if it still starts. If it starts then you have the wrong clutch wire.
Also, how did you test for the proper wire ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: i am an idiot
Date Posted: September 02, 2012 at 5:53 PM
If your vehicle is outfitted with cruise control, as stated above, there are 2 clutch switches. One to notify the cruise that you pressed the clutch, this happens at the beginning of the cycle. Second switch is the one you need, it is only activated when the clutch is fully depressed.
|