astroflex 4204 remote programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132314
Printed Date: April 27, 2024 at 8:51 AM
Topic: astroflex 4204 remote programming
Posted By: schof08
Subject: astroflex 4204 remote programming
Date Posted: October 05, 2012 at 5:00 PM
I bought a my pickup (2005 silverado 1500)awhile ago and I found out that it had a astroflex 4204u auto starter installed, but the autodealer did not have the remote for it. I recently but a replacement remote and tried programming it and seemed to get it all working except for when I to remote start it. The pickup will turn over and try to start, but wont start. It does have a bypass unit on top of the 4204u unit. it is a gmdl-bp so I dont know if that has anything to do with it. Any kinda help would would be great. I do have a dealer near by that works with astrostart, just wanted to see if I could do it myself before paying for it to be done. Thanks
Replies:
Posted By: auto enhancers
Date Posted: October 07, 2012 at 11:34 AM
Is the toggle switch on. What does it do when you try and remote start it. After it fails the led will flash on the brain a number of times(1-9) it will repeat that sequence so count how many and get back to us.
Posted By: schof08
Date Posted: October 08, 2012 at 12:34 PM
the toggle switch is on. When I prethe remote start button it cranks for about 2 or 3 seconds then stops. nevver starts. It seems to blink 12 times and wont stop blinking.
Posted By: schof08
Date Posted: October 09, 2012 at 8:07 AM
sorry about last reply. The 4204 brain was blinking 12 times, not the bypass .The bypass was blinking 6 times, but I got that programmed for my model of vehicle already. It still is not working though, The unlock and lock feature works fine, just not the autostart.
Posted By: schof08
Date Posted: October 09, 2012 at 9:47 PM
Problem solved! had to change the tach settings for an 8 cyl. vehicle
|