Print Page | Close Window

compustar dr 1000 not working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132325
Printed Date: May 14, 2024 at 5:15 PM


Topic: compustar dr 1000 not working

Posted By: fogged306
Subject: compustar dr 1000 not working
Date Posted: October 07, 2012 at 3:47 PM

I installed a Drone in my truck a couple years ago with a CM5000. Used it for a year and then didn't renew the subscription for probably a year or so. I just renewed it today and I'm getting no connection from the Drone when I send a command. I get the same issue whether I try it on my mobile app or on the website. I've left it unplugged for a while a couple times to see if it would reset, but nothing. The green cell light is on solid. I don't have the premium plan so the GPS light is not lit.

This is in a 96 K2500 and the DR-1000 is run data to the CM5000. This combo worked fine and I haven't touched a thing since I let the service lapse and then renewed it. The starter works fine with my regular remote. Any ideas?



Replies:

Posted By: fogged306
Date Posted: October 07, 2012 at 3:59 PM
The message I get from the web page when I try to send a command and it fails is this: "Vehicle did not respond in time possibly due to cell network delay."

I have AT&T coverage in my area because I had them for a cell carrier for years and haven't moved since the last time this unit was working. Unit is also just under the dash pad on the passenger side with no metal above it.





Print Page | Close Window