Print Page | Close Window

dball programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132331
Printed Date: July 17, 2025 at 6:06 AM


Topic: dball programming

Posted By: zr2sparky2000
Subject: dball programming
Date Posted: October 08, 2012 at 8:03 AM

i've installed a viper 5701 on my 2006 silverado, used the dball, and hooked it up via d2d. everything seems to be working but i can't get past the first feature in the dball programming (which is rf output)  i need to enable the heated seats which is the third feature, they are disabled by default. 

i have been doing

key on

key off

push and hold programming button til orange led

it flashes green, then red

i tap programming button (one time, two times, one hundred times, doesn't matter)

and it stays in the one green flash, one red flash

i can toggle the first menu option with the viper remote (one green flash, two red flash) but can't get past the first menu! am i missing something? is there another way to do this? i bought the dball on ebay and the seller flashed it with the firmware.




Replies:

Posted By: zr2sparky2000
Date Posted: October 08, 2012 at 7:48 PM
I figured it out. The dball wasn't flashed with with the newest firmware.


Print Page | Close Window