window roll up module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132349
Printed Date: May 09, 2024 at 6:38 PM
Topic: window roll up module
Posted By: 1prix
Subject: window roll up module
Date Posted: October 09, 2012 at 8:59 PM
hi my car is a 2005 cadillac cts i want to add the window rollup module(i have the 4 window up or down module)do i have to go to each window switch or can i go to the master 4 main switches in the drivers door?I just don't think it makes sense to go to each door.
I want the windows to roll up when i arm the system if they are in the down position and what wire from the alarm system controls this feature?
Replies:
Posted By: offroadzj
Date Posted: October 09, 2012 at 9:18 PM
I believe you can do all 4 at the main switch. As for the up when armed, you want the ground out when running wire.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: 1prix
Date Posted: October 09, 2012 at 9:56 PM
offroadzj wrote:
I believe you can do all 4 at the main switch. As for the up when armed, you want the ground out when running wire.
wouldn't that be the ground out when armed and not when running?
would i also need the ignition wire in the photo? 
Posted By: howie ll
Date Posted: October 10, 2012 at 12:09 AM
Yes, GWA not GWR.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: offroadzj
Date Posted: October 10, 2012 at 5:51 AM
sorry.... that's what I meant. In my defense, it was 10:00 at night, I had been up since 5:00 and it was a damn long and rough day at work... lol.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: howie ll
Date Posted: October 10, 2012 at 10:36 AM
Damn you Kenneth, stealing my excuses now.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: 1prix
Date Posted: October 10, 2012 at 12:09 PM
good news and bad news grrrr.
The good news is i now know what the GWA wire is(orange starter interrupt wire)
The bad news is i can't get all the windows at the main switch because i have window modules in each door. I have to run two wires to each up wires.
Posted By: 1prix
Date Posted: October 11, 2012 at 11:54 PM
question,i was told that one 4 window module is too stressful for the module and the windows. How true is that? because i have to run my wires to each door. This darn cadillac. The plan is to mount the module in the drivers door then run wire to each of the other doors.No i can't use the drivers door main switch because it is controled buy the canbus.
module is OMEGA AU-93-4
car is 2005 cadillac cts
module has 4 built in relays if that helps any.
Posted By: howie ll
Date Posted: October 12, 2012 at 2:03 AM
If your module has 4 relays, its either 4 windows up or 2 up/vent/down.
You will need two modules.
My last car, one in each kick-panel for each side and run into each motor in each door.
Now ask again what Kenny meant.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: 1prix
Date Posted: October 12, 2012 at 4:09 PM
my module is either 4 up or 4 down,right now i just want all 4 windows to go up when i hit the arm button.
I know how to install it,but is it to stressful on the module and or the doors.
Although my module can do 4 windows is it better to just use it for only two?
Posted By: howie ll
Date Posted: October 12, 2012 at 5:09 PM
Makes absolutely no difference except down is a touch easier, gravity assist.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|