Print Page | Close Window

python 991 mts mode problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132370
Printed Date: July 13, 2025 at 11:10 PM


Topic: python 991 mts mode problem

Posted By: sicivic13
Subject: python 991 mts mode problem
Date Posted: October 12, 2012 at 8:22 PM

My alarm is a Python 991 with a DEI 530T installed. So I finally figured out that my parking brake was not hooked up to the neutral safety wire in my 2008 Honda Civic Si which is why MTS mode would never work. . So I got it hooked up and everything is now working. Except for 1 problem. When I initialize the MTS mode, get out of the car and arm the alarm, the car shuts down like it's supposed and the remote indicates that MTS mode is enabled, but I notice that the lights on my door and window switches on both door panels stay lit up.  If I don't initialize MTS mode and just get out of the car and arm the alarm, the switches do not stay lit up, so apparently it has something to do with enabling MTS mode. Has anyone else encountered this problem? Does anyone have any suggestions as to why this would happen and how I can fix it?




Replies:

Posted By: sicivic13
Date Posted: October 12, 2012 at 8:31 PM
OK. Sorry but I figured it out I think. Apparently the lights on the switches are tied into the same timer as the dome light. Since the alarm is wired to the dome light switch, it turns off the dome light when the alarm is armed but the switches are still tied to the timer and go off a minute later.


Print Page | Close Window