Print Page | Close Window

blade al and alca together?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132375
Printed Date: July 05, 2025 at 12:08 AM


Topic: blade al and alca together?

Posted By: offroadzj
Subject: blade al and alca together?
Date Posted: October 13, 2012 at 4:42 PM

I am doing a remote start and alarm for a buddy of mine on a 2012 Subaru WRX. According to iDatalink, the data module (Blade-AL) can only be used for locks/alarm/etc OR for immobilizer... not both. My question is, if he doesn't have an extra key to wrap, can I add on the AL-CA bypass for the immobilizer? I'm not sure if the iDatalink modules can be "stacked" so to speak.
Thanks in advance.

Kenny

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205



Replies:

Posted By: kreg357
Date Posted: October 13, 2012 at 5:31 PM
Yes.  One way is Blade AL for locks and ADS AL CA ( W2W ) with KLON for transponder.

-------------
Soldering is fun!


Print Page | Close Window