2010 mercury milan disarm wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132390
Printed Date: May 06, 2025 at 8:00 AM

Topic: 2010 mercury milan disarm wire

Posted By: tooler
Subject: 2010 mercury milan disarm wire
Date Posted: October 15, 2012 at 12:15 PM

Does anyone have info on diasarm wire for 2010 Mercury Milan?

Replies:

Posted By: shortcircuit161
Date Posted: October 15, 2012 at 12:29 PM

The newer Fords/Mercury require a special setup to disarm the factory alarm for keyless entry.

Search the downloads section for 1098 and you will see a diagram of what is needed. There isn't a disarm wire like previous models. It involves energizing an ignition, keysense and a data module.

-------------

Posted By: tooler
Date Posted: October 15, 2012 at 1:13 PM

Thanks. That is exactly what I neeed.

Print Page | Close Window