2006 audi a4 b7 central locking pulse

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132406
Printed Date: April 29, 2024 at 12:27 PM

Topic: 2006 audi a4 b7 central locking pulse

Posted By: emmo
Subject: 2006 audi a4 b7 central locking pulse
Date Posted: October 17, 2012 at 9:12 AM

Can anyone help, Im trying to install an aftermarket coming/leaving home module for the lights.

I'm trying to locate the central locking pulse wire.
Anyone know the location/colour?

Replies:

Posted By: offroadzj
Date Posted: October 17, 2012 at 11:14 AM

Not quite sure if this is what you are looking for, but here are the power lock / unlock wires for that car:
Power Lock PURPLE / blue - Driver Door Control Module, 32 pin plug, pin 10
Power Unlock PURPLE / red - Driver Door Control Module, 32 pin plug, pin 27

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205

Posted By: emmo
Date Posted: October 17, 2012 at 1:25 PM

I've tried them and they dont seem to provide a suitable pulse.

Thanks anyway

Posted By: howie ll
Date Posted: October 17, 2012 at 3:00 PM

Define suitable pulse.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: emmo
Date Posted: October 17, 2012 at 4:11 PM

The module I'm installing can take either a +ve or -ve signal when locking/unlocking the doors to activate the coming/leaving home lights.

I tried wiring to the wires as suggested earlier up, but it didnt work.

Posted By: howie ll
Date Posted: October 17, 2012 at 4:16 PM

There's a module in the rear that includes factory alarm and central locking vacuum pump. If you open it up (very carefully) you will find the pump motor wires black and red if I remember, use the lock motor wire (0.8 seconds + pulse).

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: emmo
Date Posted: October 17, 2012 at 4:33 PM

Thanks, I will have a look at that in the morning.